2-1080S-1100, Weldon 1080 Series Halogen Warning Light 1 Wire with Stainless Steel Back (Amber)

• 2-1080S-1100
• 1 Wire
• Enhanced corrosion resistant lamp back 
• Utilizes a Standard H-3 -55 W Bulb
• 3 year warranty on lamp back
• 5 year warranty against defects in materials or workmanship
• Original vehicle warning lights equipment for major school bus builders
• Weldon 7″ Amber Halogen Overhead Warning Light with Stainless Steel Back
• Extended life version of original vehicle warning lights equipment for major school bus builders
• Flat-back design allows surface mounting (no clearance holes to cut) and provides a large gasketed sealing area to vehicle

Tech Specs:

• Depth: 2.0 inches
• Diameter: 7 inches
• Wattage: 55
• Volts: 12.8
• Amperage: 4.6

These 7? diameter school bus lights surface mount to a vertical, planar vehicle surface using 4 customer supplied #8 or #10 screws on a 6.25? bolt circle.  The lamp includes a 10 mm thick closed cell foam pad that compresses to seal between the lamp body and the mounting surface.  Wire exit into the vehicle must be placed so that lead wires can pass directly from the lamp through the mounting surface without being pinched.  All holes for passing wires must use a protective grommet. 

36 per Master case 

Service Parts:

• Lens: OC12-1184
• Mounting Gasket: 1018
• Bulb: H-3
• Lens Gasket: OD10-1185-00
• Visor: 1021
• For use with the 7000 8 Lamp Flasher 

Red Full Assembly: 1-1080-1100 

Red Lens Only: OC11-1183 

Amber Lens Only: OC12-1184 

Weldon Part# 1080S-1100-20

Cross Numbers: 453606001 / 8137SA, W1080A-SS